Search results for "Motor drive"

Identification of induction motor thermal model for improved drivetrain design

2016

Selection of components of electric drivetrains is not only based on evaluating their ability to perform according to mechanical specifications, but — what is equally important — on assessing their thermal protection limits. These are typically affected by electrical and thermal properties of motors and drives. Although rated parameters (such as power, torque, speed, etc.) are easily accessible in catalogs of equipment producers, more specific properties like mass / length of copper winding, heat dissipation factor, rotor / stator dimensions etc. are not available to customers. Therefore, effective selection of drivetrain components is limited due to the lack of sufficient data and the need…

Parameter sensitivity of flux-linkage based sensorless control for permanent magnet synchronous motors

2017

Sensorless control can be utilized to reduce cost, size and total complexity of a motor drive or enhance reliability of the system. This paper first presents a sensorless control algorithm for a surface permanent-magnet synchronous motor (SPMSM) based on estimated flux linkages and stator currents. Within the algorithm, rotor position error can be predicted by comparing the estimated currents with measured stator currents. Performance of the sensorless control based on flux-linkages and the dependency of the algorithm on motor parameters is then numerically investigated via simulations. It is found from the investigation that the accuracy of the method depends on the motor working condition…

Back EMF Sensorless-Control Algorithm for High-Dynamic Performance PMSM

2010

In this paper, a low-time-consuming and low-cost sensorless-control algorithm for high-dynamic performance permanent-magnet synchronous motors, both surface and internal permanent-magnet mounted for position and speed estimation, is introduced, discussed, and experimentally validated. This control algorithm is based on the estimation of rotor speed and angular position starting from the back electromotive force space-vector determination without voltage sensors by using the reference voltages given by the current controllers instead of the actual ones. This choice obviously introduces some errors that must be vanished by means of a compensating function. The novelties of the proposed estima…

Automotive Brushless Motor Powered by Fuel Cell

2014

EMI Analysis in Electrical Drives under Lightning Surge Conditions

2012

In this paper, a complete model of a power drive system including the earth electrodes is proposed to evaluate electromagnetic conducted interference due to lightning pulses. Circuit model of a power drive system is joined with a full-wave approach for the simulation of the time behavior of the grounding system. The proposed model enables to predict the electromagnetic conducted interference generated in the power drive system when lightning conditions involve the earth electrodes.

Analysis a DSP Implementation and Experimental Validation of a Loss Minimization Algorithm Applied to Permanent Magnet Synchronous Motor Drives

2004

In this paper a new loss minimization control algorithm for inverter-fed permanent-magnet synchronous motors (PMSM), which allows to reduce the power losses of the electric drive without penalty on its dynamic performances, is analyzed, experimentally realized and validated. In particular, after a brief recall of two loss minimization control strategies (the "search control" and the "loss-model control"), both a modified dynamic model of the PMSM, which takes into account the iron losses, and a "loss-model" control strategy, are treated. Experimental tests on a specific PMSM drive employing the proposed loss minimization algorithm were performed aiming to validate the actual implementation.…

Dynamical Compensation of the Load Torque in a High-Performance Electrical Drive with an Induction Motor

2018

This paper describes a new method for dynamical estimation of load disturbance in induction motors by using Nonlinear Unknown Input Observers (NUIO). This estimation is then used to compensate dynamically the load torque in a Field Oriented Control (FOC) induction motor drive to increase its load-rejection capability. The method has been verified both in simulation and experimentally on a experimental rig.

PVDF based vibration measurements and their correlation with torque estimation in a FOC induction motor drive

2008

This paper presents a study concerning the vibrations generated by an induction motor drive controlled by field oriented control algorithm (FOC). The aim of the study is to identify suitable measurement points and analysis techniques in order to achieve information about vibration generated by an electric drive. Vibrations take origin both by the torque generated by the motor and the motor supply through an inverter, then they are transmitted to neighbouring structures. Torque is estimated on the basis of the estimated flux linkage; vibrations have been both measured and analysed numerically by FEM at two points of the cradle. The numerical and experimental analysis have been carried out fo…

Method for designing PI-type fuzzy controllers for induction motor drives

2001

The paper illustrates a new systematic method for designing PI-type fuzzy controllers for direct field-oriented controlled induction motor drives. First, linear and decoupled models expressing the dynamics of speed, rotor flux, direct and inquadrature stator currents are derived using a nonlinear static compensator and choosing convenient input variables. Then, to guide the dynamics of the above quantities, four conventional PI controllers are designed independently, choosing their bandwidths conveniently. Finally, the input and output scale factors of PI-type fuzzy controllers are derived from the conventional PI controller parameters. The whole drive controller also includes a rotor flux …

Vibration signature analysis for rotor broken bar diagnosis in double cage induction motor drives

2013

The paper investigates the diagnosis of rotor broken bars in field oriented controlled (FOC) double cage induction motor drives, using current and vibration signature analysis techniques. The Impact of the closed loop control system cannot be neglected when the detection of asymmetries in the machine are based on the signature analysis of electrical variables. The proposed diagnosis approach is based on optimized use of wavelet analysis by a pre-processing of phase current or axial/radial vibration signals. Thus, the time evolution of the tracked rotor fault components can be effectively analyzed. This paper shows also the relevance of the fault components computed from axial vibration sign…